RUBBER COMPOUNDS
At Grupo Elastorsa, we actively participate in the technical and industrial progress to which rubber has contributed through the formulation of composites based on both Technical Elastomers and High Performance Elastomers. We carry out this task following high-quality criteria and the use of cutting-edge technologies to satisfy the needs of our clients in a personalised way. Grupo Elastorsa designs and manufactures both black and coloured compounds for different application and usage segments.
TECHNICAL ELASTOMER
EPDM
Excellent resistance to weathering, ozone, light and water, together with its great versatility, are properties that make EPDM a material suitable for many sectors, including automotive and transport. It is also a perfect elastomer for the construction sector, used in profiling and insulation as well as in the energy and industrial sectors.
HARDNESS RANGE | 30 - 90 |
DESCRIPTION | Ethylene propylene |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive and Construction |
NR has excellent mechanical properties, including high tack. This makes it an ideal elastomer for the automotive and industrial sector (tyres, anti-vibration mounts, mats, etc.) as well as for the fashion segment (footwear).
HARDNESS RANGE | 30 - 100 |
DESCRIPTION | Natural Rubber |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
SBR
SBR is characterised by good processability and high hysteresis, which makes it an ideal material to manufacture tyres, shoes, conveyor belts, etc.
HARDNESS RANGE | 40 - 100 |
DESCRIPTION | Styrene butadiene |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
IIR
Excellent impermeability to gases, coupled with resistance to ozone and ageing, make IIR a perfect elastomer for use in sporting equipment (climbing shoes), industry (gloves and gas masks) and even in the health or cosmetic sector (droplet dispensers).
HARDNESS RANGE | 40 - 90 |
DESCRIPTION | Butyl |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Tyres, Pharmaceuticals, Industry and Sports Equipment |
NBR
NBR has good adhesion to metals, is resistant to oil, grease and non-polar solvents. It is used effectively in the manufacture of gloves, power supply systems, fluid handling systems, as well as drive belts and automotive seals, among others.
HARDNESS RANGE | 40 - 95 |
DESCRIPTION | Butadiene acrylonitrile |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
CR
CR has good mechanical properties, as well as resistance to fire, ozone, weather and water. Its application sectors include industry, in the manufacture of sealing gaskets and coatings; automotive for drive belts and bellows; and infrastructure, in supports and seals for bridges and viaducts.
HARDNESS RANGE | 30 - 95 |
DESCRIPTION | Polychloroprene |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive, Industrial and Infrastructures |
HIGH PERFORMANCE ELASTOMER
HNBR
HNBR has a high resistance to oil, ozone and high temperatures, making it the perfect choice for static and dynamic seals, automotive hoses, as well as seals and drive belts for other industries. The oil and gas industry is another area of use for sealing gaskets.
HARDNESS RANGE | 40 - 95 |
DESCRIPTION | Acrylonitrile Hydrogenated Nitrile |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
ACM
ACM's resistance to high temperature oils and ozone makes it ideal for applications in contact with fuels, lubricants and other hydraulic fluids.
HARDNESS RANGE | 40 - 90 |
DESCRIPTION | Polyacrylic |
TRANSFORMATION | Compression, Injection and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
FKM
FKM has exceptional resistance to chemicals, ozone and very high temperatures (up to 220 °C), making it the perfect elastomer for the aerospace and automotive industries (fuel lines and O-rings) as well as the chemical industry.
HARDNESS RANGE | 60 - 90 |
DESCRIPTION | Fluoroelastomer |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive, Industrial & Food |
ECO
ECO is highly-resistant to fuels, weathering, ozone and low temperatures, making it suitable for the manufacture of fuel seals, diaphragms and fuel pipes. The low permeability of homopolymers makes them particularly suitable for hoses and air conditioning equipment.
HARDNESS RANGE | 50 - 90 |
DESCRIPTION | Epichlorhydrin |
TRANSFORMATION | Compression, Injection and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
CSM
Resistance to flammability, ozone and chemicals makes CSM a useful elastomer in the manufacture of seals, coatings and technical gloves. It is commonly used for waterproofing and paving in construction and the chemical industry.
Due to its high UV resistance, it allows for greater stability in the manufacture of colour compounds.
HARDNESS RANGE | 45 - 100 |
DESCRIPTION | Chlorosulphonated polyethylene |
TRANSFORMATION | Compression, Injection and Extrusion |
MAIN APPLICATIONS | Industrial and Construction |
CPE
With high resistance to oil, oxygen, ozone and extreme temperatures, AEM is a high performance elastomer suitable for manufacturing turbocharger hoses, crankcase and radiator gaskets, and insulators and diaphragms in other industries.
HARDNESS RANGE | 60 - 90 |
DESCRIPTION | Chlorinated polyethylene |
TRANSFORMATION | Compression, Injection and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
AEM
This innovative material stands out for its excellent mechanical properties and high tack. It is ideal for the automotive industry, in applications such as tyres and anti-vibration components, as well as in the flooring industry, thanks to its reliability and ability to adhere to various surfaces.
HARDNESS RANGE | 50 - 90 |
DESCRIPTION | Ethyl acrylate |
TRANSFORMATION | Compression, Injection, Calendering and Extrusion |
MAIN APPLICATIONS | Automotive and Industrial |
FORMATS
Grupo Elastorsa offers a wide range of presentations to meet market needs. The use of different packaging groups ensures the quality of our products at all times until they are received by our customers.
![](https://www.grupoelastorsa.com/wp-content/uploads/2024/05/tablones-precortados.png)
PRE-CUT FOLDED
STRIPS (WIG WAG)
Pre-cut strips directly in line and placed on a pallet.
- Width: 30-700 mm
- Thickness: 4-11 mm
![](https://www.grupoelastorsa.com/wp-content/uploads/2024/05/bandas-festoneadas.png)
CONTINUOUS STRIP
Strip produced by extrusion up to 250 mm and different thicknesses.
- Width: 10-250 mm
- Thickness: 4-11 mm
![](https://www.grupoelastorsa.com/wp-content/uploads/2024/05/placas-con-o-sin-antiaadherente.png)
SLABS WITH OR WITHOUT ANTIADHERENT
Slabs in different sizes and thicknesses.
- Width: 300-600 mm
- Thickness: 4-8 mm
- Lenght: 1000 mm
![](https://www.grupoelastorsa.com/wp-content/uploads/2024/05/granulados.png)
GRANULATE
Different granulometries. According to client requirements.
![](https://www.grupoelastorsa.com/wp-content/uploads/2024/05/bobinas.png)
COILS
Calendering width up to 2 m. Coils of any length, starting from 10 m.
![](https://www.grupoelastorsa.com/wp-content/uploads/2024/05/mezclas-extruidas.png)
EXTRUDED
MIXTURES
With different sections. Available in reels, boxes and containers to client requirements.
FOR MORE INFORMATION >
![](/wp-content/uploads/2024/05/elastorsa-logo-2x.png)
![](/wp-content/uploads/2024/06/arnedo-mapa-cabecera-new.jpg)
Carretera de Quel, 35
26580 Arnedo (Spain)
Phone: +34 941 380 200
elastorsa@grupoelastorsa.com
![](/wp-content/uploads/2024/06/cuachos-bracamonte.jpg)
Pol. Ind. El Inestal Parc. 19-20
37300 Peñaranda de Bracamonte (Spain)
Phone: +34 923 541 444
elastorsa@grupoelastorsa.com
![](/wp-content/uploads/2024/05/idc-mapa.jpg)
Carretera Artica 16
31013 Artica (Spain)
Phone: +34 948 145 388
idcrubber@grupoelastorsa.com
idc-orders@grupoelastorsa.com
![](/wp-content/uploads/2024/05/Francia.jpg)
580 rue des bruyères - ZI la Saussaye - Saint Cyr en Val
45075 Orléans Cedex 2
Phone: +33 2 38 41 45 91
elastorsa@grupoelastorsa.com
![](/wp-content/uploads/2024/06/Eslovakia_sin_coches_02.jpg)
Robotnícka 36
036 01 Martin (Slovakia)
Phone: +421 43 401 08 14
elastorsa@grupoelastorsa.com